Features; Assembly - Ryobi RYSWP25 Manuel D'utilisation

KNOW YOUR SWEEPER ATTACHMENT
See Figure 1.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
UNPACKING
This product requires assembly.
 Carefully remove the items from the box. Make sure that
all items listed in the packing list are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
PACKING LIST
Sweeper Attachment
J-Handle with Hardware
Wheels
Rotating Brushes
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.

FEATURES

PRODUCT SPECIFICATIONS
Total Sweeping Width ............................................ 15.25 in.
Brush Length ............................................................. 6.5 in.
Brush Diameter........................................................... 10 in.

ASSEMBLY

WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not connect to power head until assembly is complete.
Failure to comply could result in accidental starting and
possible serious personal injury.
INSTALLING THE ROTATING BRUSHES
See Figure 2.
 Remove the hitch pins from the spindles at the front of
the attachment.
 Slide the rotating brushes onto the spindles.
 Secure the brushes in place using the hitch pins.
INSTALLING THE WHEELS
See Figure 3.
Wheels are provided to assist in moving the sweeper across
the cleaning surfaces. The wheels can be removed when
cleaning narrow spaces.
 Remove the hitch pins and washers from the axles on
the rear of the attachment.
 Slide wheels onto the axles and reinstall the washers and
hitch pins to secure.
To remove:
 Remove the hitch pins, and slide the wheels and washers
off of the axles.
6 — English