Starting Up - Inomak UFI1170SL Directives D'installation, D'utilisation Et D'entretien

The appliance is supplied with a power plug. The power plug is stored in the back side of the appliance,
inside or under the condensing unit room.
Remove it and connect it to the power socket.
The figure that will appear in the display shows the temperature in the cabinet.
The compressor starts after 2 minutes.
These functions or periods, may vary according to the settings chosen your installer of the device.
Consult for any differences.
To turn on the lamp, use the key
4

Starting Up

For RU (Remote Unit) models only
on the right of the thermostat.
8
ENG