Orbegozo THA 200 Manuel D'instructions page 40

THA 200 THA 315 THA 465
INTERNAL SETTING OF THE APPLIANCE
The appliance has 2 internal settings: Temperature Compensation and Open Window mode. To
access them, while in standby mode, press and hold the button
(which is the Temperature Compensation mode) and if you press the button
Window mode) will show.
F0 Temperature Compensation. Compensation is initially set at 0. It may vary from -5ºC
-
to 5ºC. For example, if the display shows an ambient temperature of 25ºC and the real
temperature is 23ºC, you must set the parameter to -2°C to compensate for this
difference in temperature. In this way 25ºC was previously shown and now it will display
23ºC (25 - 2).
Open Window mode (F1). If you want to use this mode you must set a warm -up time of
-
60 minutes or 90 minutes. After this time, if the temperature drops 2ºC in 5 minutes, the
appliance will stop working. If you do not want to enable this feature, set the time at 0.
Set 60, 90 or 0 by pressing the buttons
When the mode is enabled the symbol
-
and .
is displayed.
. The display will show F0
F1 (Open
40