Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The Control Panel is always placed on the upper side of the machine and consists of 4 lights indications:
POWER: red light which turns on when the electric power arrives at the machine;
FULL: green light which turns on when the water tank is full. When this light is on, the machines will stop running.
PAUSE (DEFROST): red light which turns on when the compressor is in „pause or idle‟ position for the programmed
delayed start off at first start up of the machine, or during the defrosting phases.
RUNNING: red light on when the dehumidostat starts up automatically the functioning of the machine.
The Dehumidstat consists of a number scale ranging from 1 to 5. The minimum value correspond to 80%, the highest
value to 20%; the intermediate value (3-4) indicates that the humidity is at approx. 55%, a suggested good general value.
In the position "CONT", the machine will keep running all the time, independently from the relative humidity in the room.
In position "OFF", the machine is not running and will never start running (one-pole switch)
4. CONTROL AND DISPLAY PANEL

CONTROL PANEL

DEHUMIDOSTAT
HOUR COUNTER
All models are equipped with an Hour Counter which is located in the rear side of
the machine: this will show the hours that the machine has been working.

Publicité

Table des Matières
loading

Table des Matières