Network; Hdmi Setting - Xoro HBD 1000 Manuel D'emploi

SETUP

Network

Internet Connection
Please enable the internet connection if you want to use BD-
Live function.
Information
You can view the net work information here.
Connection Test
Carry out here the connection test.
IP Setting
You can either have setting configured automatically (Auto) or
do it manually (Manual).
Make input with the numerical buttons, navigate with the arrow buttons, delete with the CLEAR button
and confirm with OK on this window. Press RETURN to quit the IP settings.
BD-Live Connection
You may allow all BD-live discs to connect the network (Permitted), or allow only discs with owner
certification (Partial Permitted), or prohibits all BD-Live discs to connect to the network.
UPnP
Enable or disable the UPnP function. Please refer to page 24 for details.
Proxy Setting
Enable or disable the Proxy server to connect to the network.
You can set the Proxy Host or enter a new port under Proxy Port

HDMI Setting

HDMI
Resolution
Select the video output resolution. In case of Auto, resolution is
set to the maximum resolution according to the connected TV.
Audio Output
Bitstream: Output the Dolby Digital or other surround sound formats as Bitstream (RAW) through
HDMI. The player could not regulate the volume in this case.
PCM:The player can decode Dolby Digital/dts surround sound and out put it as analogue or PCM
stereo.
Reencode: PCM stereo and Bitstream out put will be mixed.
HDMI 1080P 24Hz
The playback might be smoother with this function activated.This function is available when your TV/AV
receiver support this function, and the unit is connected with an HDMI cable.
ENG-27