When you contact the after-sales service of your distributor or your store, give him the
complete reference of your device (commercial name, type and serial number). This
information appears on the visible descriptive plate behind the device.
6. CLEANING AND MAINTENANCE
- Disconnect the device.
- Let cool completely the device before any technical intervention or cleaning.
- Never clean the quartz tubes when they are hot
- Avoid touching quartz tubes with your fingers but use a cloth moistened with spirit.
- Clean regularly the external walls of your device with warm water and wash liquid:
avoid the abrasive towelling. Rinse your device with a wet sponge.
- Never clean the device under a water jet, the infiltrations would risk to damage it in a
irreparable way.
- Never immerse the device, the cord or the plug in the water or quite other liquid to
avoid any electric shock.
- During a prolonged non-use, we recommend you strongly to keep the device shield-
ed from the humidity.
7. TECHNICAL SPECIFICATIONS
Models
Outside dimensions mm
Weight
Power
No quartz tube
Current
Voltage
Wires colours correspondence
8. NORMS AND LEGALS DISPOSALS
The device is conform to :
IEC/EN 60335-1
IEC/EN 60335-2-48
EN 55014-1 + 55014-2
EN 61000-3-2 + 61000-3-3
TS 1270
TS 3270
1 cable
640x380x330
640x380x475
13 Kg
2700 W
4000 W
6
11 A
17.4 A
220-240 V ~
380-440 V 3 N ~
Phase 1
Phase 2
Phase 3
Neutral
Earth
TS 3270
2 cords
640x380x475
19 Kg
19 Kg
2 x 2000 W
9
9
8.5 A/Phase
2 x 220-240 V ~
Brown
Black
Grey
Blue
Yellow-Green
16