Anti-Frost Mode; Keypad Blocking - EQUATION Alutec Manuel D'installation Et D'entretien

1.4 OPERATING MODES: COMFORT / ECONOMY / AUTOMATIC. Temperature selection
Check that the thermostat IS NOT IN THE STANDBY POSITION.
Pressing will step through the comfort, economy and Pro automatic operating modes.
To change the temperature in comfort mode, press the
temperature is not changed, it will be a maximum of the selected comfort mode temperature,
less 3 ºC.
When the room temperature is less than that selected, the heater is switched on and the
symbol is displayed.
In automatic Pro mode, the programming stored in the heater is activated. This mode is
indicated by displaying the work "Pro" on-screen, as well as the temperature selected
according to the time band.
The on-screen displayed temperature is that selected in comfort and economy modes.

1.5 ANTI-FROST MODE

Press the button for three seconds in order to enter the anti-icing mode. The selected
temperature will be 7 ºC.
The anti-frost temperature cannot be changed.

1.6 KEYPAD BLOCKING

The keypad is blocked by simultaneously pressing the
buttons for three seconds.
Repeating this same process will unblock it.
8h 12h 16h
0h 4h
and
3 seconds
and
ENGLISH
20h 24h
1
2
3
4
5
6
7
buttons. If the economy
3 seconds
E
17