Cleaning And Maintenance; Technical Specifications - Perel PHG3 Mode D'emploi

Low heat
•
In the low heat setting, the temperature is fixed to 50°C and cannot be changed.
•
To set the airflow, press the air flow adjustment button.
High heat
•
In high heat setting, you can set both the temperature and the air flow.
•
To the set temperature
•
To set the airflow, press the air flow adjustment button.
Switching off
•
Set the switch to 0.
•
Tip: before switching off, set the appliance to the low heat stage, work a few moment and allow the
device to cool down.
7.

Cleaning and Maintenance

•
Make sure the heat gun is unplugged from the mains.
•
Wipe the device with a moist, lint-free cloth. Do not use alcohol or solvents. Do not submerge in any
liquid.
•
Make sure the ventilation openings are clean at all times.
•
Do not store the heat gun in a humid environment.
•
Contact your dealer for spare parts if necessary.
8.

Technical Specifications

input voltage
max. power
power cord length
air flow
temperature
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our
website www.perel.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 01 – 14/05/2014
PHG3
230 VAC 50 Hz
2000 W
1.8 m
setting I: 250 L/min
setting II: 250-550 L/min
setting I: 50 °C (cool-air stage)
setting II: 50-600 °C (hot-air stage)
260 x 90 x 210 mm
730 g
minimum air flow
maximum air flow
7 ©Velleman nv