Maintenanc E And R Epair; Dismantling The Instrument - Time Electronics 1041 Manuel Technique

6

5. Maintenanc e and R epair

Dismantling the Instrument

Remove rubber protection boot and then removal of four screws enables the cover to be
taken off which provides access to all parts of the instrument.
Repair
NOTE: No repair work should be undertaken by the customer while the instrument is
under warranty as such work may render the warranty invalid.
Certain of the precision components used in this instrument are not readily available and
make repairs by the customer difficult if these components are damaged.
Overload conditions can cause a unit failure.
1041 Technical Manual 6