Push/Pull Recovery Setup - hilmor 1950536 Mode D'emploi Pour L'utilisation Et L'entretien

•
•
•
•
• Turn the machine knob to Purge position and start the machine by pressing the
•
•
• The hose connected to the cylinder will contain a small amount of refrigerant.

PUSH/PULL RECOVERY SETUP

System
1
Recovery Machine
2
DOT Cylinder
3
Cylinder Vapor Port
4
WARNING: Before using your machine, read all Safety and Warnings and
Setup/Pre-Operation
Push Pull recovery method should only be used on large systems with greater that
• Power on the unit using the green switch on the side of the machine.
•
•
•
•
• Turn the machine knob to Recover.
Cylinder Liquid Port
5
Refrigeration Hose
6
Refrigeration Scale
7
Refrigeration Scale Hand Held
8
ENGLISH
13 13