Télécharger Imprimer la page

Goodlife Pest Repeller Ultimate AT Mode D'emploi

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Part List
A – Night Light
B – Ultrasonic Speaker
Getting Started
Remove the Ultimate AT from its packaging. Plug your Ultimate AT into an available wall socket. We recommend plugging it into the socket
closest to where you are seeing the pest problem. If you are currently not seeing any pests, plug your Ultimate AT in a central area.
When you plug the Ultimate AT in, the three Indicator Lights (C) on the front of the unit will light up, letting you know that all three pest
control technologies are functioning properly.
The Orange Light will stay on constantly – indicating the Ionic feature is working.
o
The Red Light will flash slowly – indicating the Electro-Vibrawave™ technology is working.
o
The Green Light will flash rapidly – indicating the Ultrasonic sound is working.
o
If you purchase multiple Ultimate AT units, place them evenly throughout the building. We recommend at least two per floor in your home or
building.
To adjust the Night Light (A), locate the Night Light Switch (F) on the left side of the unit. You may set the Night Light to either "Off",
"Sensor", or "On".
"Off" disables the Night Light.
o
"Sensor" activates the Night Light only when the lights in the room are turned off.
o
"On" keeps the Night Light turned on all day and night.
o
Features
Ultrasonic Pest Control
Generates a powerful high pressure sound inaudible to humans
and pets ,yet as loud as a siren to insects and rodents. Pests get
pounded by the daunting sound and flee.
Electro-Vibrawave™ Pest Control
Surges digitally-processed magnetic vibrations through the wiring
deep within your walls where pests nest and breed. Transforms
your home into an uninviting, hostile environment for pests.
AC Pass-Through (Not included with 220v models) – Allows you to plug in additional small electronic devices.
Pest Repeller Ultimate® AT
Instruction Manual / Mode d'emploi
C – Indicator Lights
D – AC Pass-Through
Ionic Pest Control
Pumps out beneficial negative ions that clean the air of pollutants
and food odors that attract pests. Ionic technology has been used
for years in the air purification industry.
Night Light
The energy-conserving blue LED night light automatically
illuminates dark corners and hallways with a soft glow.
E – AC Plug
F – Night Light Switch

Publicité

loading

Sommaire des Matières pour Goodlife Pest Repeller Ultimate AT

  • Page 1 Pest Repeller Ultimate® AT Instruction Manual / Mode d’emploi Part List A – Night Light C – Indicator Lights E – AC Plug B – Ultrasonic Speaker D – AC Pass-Through F – Night Light Switch Getting Started Remove the Ultimate AT from its packaging. Plug your Ultimate AT into an available wall socket. We recommend plugging it into the socket closest to where you are seeing the pest problem.
  • Page 2 Important Notes • The ultrasonic sound emitted by the Ultimate AT can travel up • It is normal to see a slight increase in the amount of pests to 5,000 sq. feet in an open area (such as a warehouse), during the first two weeks after installation.
  • Page 3 Pest Repeller Ultimate® AT Mode d’emploi Part List / Liste des pièces A – Veilleuse C – Témoins lumineux E – Commutateur de la veilleuse B – Haut-parleur ultrasonique D – Prise courant alternatif Guide de démarrage Retirez l’Ultimate AT de son emballage. Branchez votre Ultimate AT dans une prise murale libre. Il est recommandé de le brancher dans la prise la plus proche de l’endroit où...
  • Page 4 Puissance : 220V-240V/50Hz – fiche GS/BS/SAA (le son ne passera pas à travers de gros obstacles) • Consommation : Le Pest Repeller Ultimate AT® dépense très • Dimensions : Environ 5 x 2 ¾ x 2 ¼ pouces peu d’énergie. (8W Max) Foire Aux Questions L’Ultimate AT nécessite-il des réglages ou de l’entretien ?