Publicité
Les langues disponibles
Les langues disponibles
1074, Avenue des Carrières – Z.A la Plaine du Caire III
13830 ROQUEFORT LA BEDOULE – FRANCE
www.ermax.fr - E-Mail : accueil@ermax.fr
Fixing kit
- 2 plastic spacers Ø10 L : 5mm
Fitting instructions
- Remove the cover which surround the windshield : 2 Phillips screws under the air intake, and the
rest is clipped.
- Remove the original windshield then place the Ermax windshield on the scooter, by inserting both
plastic spacers between this one and the dash board at the level of lower fixings.
- Fix the windshield with original screws and washers.
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicles made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* The mentioned label of motorbikes's manufacturers are indicated exclusively as a reference to Ermax accessories.
* Screens damaged by an inadequat washing are not guaranteed (abrasive, corrosive ... products, solvent, thinner, benzine ...). Wash immediately brake or battery fluid which may flow on accessories.
Location of the original cover fixing screws in green
Location of plastic spacers in red
« CAUTION »
FITTING INSTRUCTIONS
ERMAX WINDSHIELD
ADAPTABLE ON PCX 125/150 2014 → ∞
Publicité
