APUS ALPHA Mode D'emploi page 16

Table des Matières

Publicité

Zeichenanzeige zu programmieren, drücken Sie Knopf A um das Display
zu aktivieren, drücken Sie nun Knopf A erneut um zur Datumsanzeige
zu wechseln. Drücken Sie nun Knopf B für drei Sekunden um in den
Stellmodus für die Zeichenanzeige zu wechseln. Drücken Sie Knopf A um
das aktuelle Zeichen einzustellen, drücken Sie Knopf B um zum nächsten
Zeichen zu wechseln.
ENGLISH
FEATURES
Horizontal or vertical time and date display, display up to 10 preset
letters after the time has been displayed.
TIME DISPLAY
Press button A to activate the display, the time will be displayed, for a
few seconds, the preset letters will scroll through afterwards (for about
10s). Press button A again to display the date. To switch between vertical
and horizontal display mode: activate the display by pressing button A,
then press down button B for 3s.
TIME SETTING
Press button A to activate the display. Press and hold button B to activate
the setting mode. The 12Hr / 24Hr option will fl ash. Press button B to
toggle between 12Hr / 24Hr display mode. Press button B to switch to
Hour setting. Press button A to set the hours, after that press button B
to switch to minutes, press the button A to set the minutes. Continue
30
to press button B to adjust date and month. To set the preset letters,
activate the display by pressing button A, and press it again to enter
the date display. Now press and hold button B for 3 seconds. You will
now enter the pre-et letters setting mode. Press button A to adjust the
current letter. Press button B to toggle to the next letter. Press button A
to adjust the letter.
FRANCAIS
LES PARTICULARITES
Indication du temps horizontale et vertical, date, indication de jusqu'à 10
caractères après indication du temps.
AFFICHAGE NORMAL DE L'HEURE
Appuyez sur bouton A pour activer l'écran. Le temps sera indiqué pour
quelques seconds, après les caractères préréglés seront indiqués succes-
sivement (pour environ 10 secondes). Appuyez sur bouton A encore une
fois pour l'indication de la date. Pour changer d'indication horizontale et
verticale: activez l'écran en appuyant sur le bouton A, ensuite appuyez
sur bouton B pour trois secondes.
REGLER L´HEURE
Appuyez sur le bouton A pour activer l'écran. Appuyez sur le bouton B
et continuez de l'appuyer pour activer le mode de réglage. L'indication
12h/24h clignotera. Appuyez sur le bouton B pour changer le mode
12h/24h. Appuyez sur le bouton B pour changer au réglage de l'heure.
31

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

BetaGammaZetaDeltaEpsilonTheta ... Afficher tout

Table des Matières