Design Information; Models Available; Product Dimensions And Clearances; Tools Required - GE GCG1580 SS Instructions D'installation

MODELS AVAILABLE

GCG1580 SS
GCG1500 BB
GCG1500 WW
GCG1700 II*
ZCGS150 SS
ZCGP150 II*

PRODUCT DIMENSIONS AND CLEARANCES

24" 15"
(61 cm) (38.1 cm)
min. min.
Locate the outlet 18" (45.7 cm) min. from the
floor, 3" (7.6 cm) min. from either side

TOOLS REQUIRED

•Level
•Phillips screwdriver
•Pliers
All parts are located in a package inside the drawer.
To order additional parts, call 800.626.2002 or visit
GEAppliances.com in the United States. In Canada,
call 1.800.561.3344 or visit www.GEAppliances.ca.

Design Information

34" (86.4 cm)
to
35" (88.9 cm)
23" (58.4 cm)
•Gloves
•Measuring tape
*For ZCGP150 II and GCG1700 II, also refer
to the instructions provided on the template
packed with those models.
33-3/4"
(85.7 cm)
min.
to
35" (88.9 cm)
max.
14-7/8" (37.8 cm)

PARTS SUPPLIED

• 6 mounting screws,
#8 x 11/16" (1.8 cm) long
• 2 side-mounting clips
Additional parts for ZCGS150SS and ZCGP150II
• Door toekick
• Top toekick
• Base toekick
3
• Allow 23" (58.4 cm)
clearance at the front for
a full drawer opening.
• Allow 6" (15.2 cm)
clearance on the right
side to the nearest
vertical wall or cabinet
for bag removal.
• Note: This compactor is
designed for built-in
applications only.
• 2 countertop retaining
brackets
• 8 Toekick screws,
#8 x 5/16" (0.8 cm) long
• 4 White mounting
screws, #8 x 11/16"
(1.8 cm) long