Day Status Screen (Fast Or Feed); Batch Status Screen; Silo Status Screen - Roxell RDC Guide D'emploi

Day Status Screen (Fast or Feed).

The RDC has two built in feeding programs.

A programmable weekly feed table.

Skip a day feeding program.
The bottom row of the Day status screen shows if the current weekday is a fast or feed
day.

If the Weekly feed table (on page 15) is being used then the top row will show the
current week day.

If the Skip a day feed program (on page 14) is being used the top row will show
skip day counter.
Weekly feed table
Monday
FeedDay

Batch status screen

Press once again on the Forward arrow
The top row displays quantity of feed left to give in the current batch and the total
quantity of the batch (in parentheses).
The bottom row displays the batch destination („Females‟ or „Males-HX‟ where X is the
hopper number 1-6) and how many seconds left until the auger motor starts up again.

Silo status screen

Press once again on the Forward arrow key
The top row displays the current main feed silo weight.
The bottom row displays the amount of feed last filled into the main feed silo (by feed
truck). The last filling can be cleared by pressing on the PROG key
for the total. When the Flock total is cleared (see History on page 21) the last filling will
also be cleared.
Roxell Daybin Controller – RDC
Skip counter: 2
FastDay
key to go to the Batch status screen.
Left: 128[ 300]
Females Timer 120
to go to the Batch status screen
Silo W. 2500Kg
Truck 5000Kg
Page 10 of 193
Skip a day
and entering zero