Screen Research FSD Manuel D'installation page 26

Manual
7
Place the completed frame onto the screen fabric which is laying on top of the provided
plastic sheeting on the floor.
Please make sure that the screen fabric is perfectly centered, top and bottom, left and right before
moving on to the next step.
Use of the spring attachment tool.
Refer to the drawing which shows positions A, B, C & D while using the tool.
Begin by attaching two springs while using the spring attachment tool at each screen frame corner
in this order, A > B > C > D.
Please refer to the spring installation photographs on Page-26
After fixing all the springs fix the fabric corners with the double-side tape like the last images.
Made by Adeo Screen Sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Please verify that you are working with the latest revision of this document before specifying your screen.
Doc: FSD – Installation Manual rev5 | 24.01.2019
INSTRUCTION FOR ASSEMBLY THE SCREEN
Page 26