Mixtrax Settings - Pioneer DEH-S5120BT Mode D'emploi

Menu Item
ILLUMI FX (Only for DEH-S5100BT/S5120BT)
[ON], [OFF]

MIXTRAX settings

Menu Item
SHORT PLAYBCK
[1.0 MIN], [1.5 MIN], [2.0 MIN],
[2.5 MIN], [3.0 MIN], [OFF]
FLASH AREA (Only for DEH-S5100BT/S5120BT)
[KEY/DISPLAY], [KEY], [OFF]
FLASH PATTERN (Only for DEH-S5100BT/S5120BT)
[SOUND LEVEL 1] to [SOUND LEVEL
6]
[LOW PASS 1] to [LOW PASS 6]
[RANDOM1]
[RANDOM2]
[RANDOM3]
Description
The illumination effect can be seen when:
– there is an incoming call when [FLASHING] is
selected in [PHONE COLOR]
– you are on a phone call
– the message received on the device is being
read when a Pioneer Smart Sync connection is
made
– a CD is inserted/ejected
– the front panel is attached.
The illumination effect will activate when the
ACC power is turned on/off regardless of this
setting.
Description
Select the length of the playback time.
Select the area for the illumination effect.
When [OFF] is selected, the color set under the
ILLUMINATION settings (page 29) is used as the
display color.
Change the illumination effect according to
the sound and bass level.
The flash pattern changes according to the
sound level.
The flash pattern changes according to the
bass level.
The flash pattern changes randomly according
to the sound level mode and low pass mode.
The flash pattern changes randomly according
to the sound level mode.
The flash pattern changes randomly according
to the low pass mode.
- 30 -