< Before use, completely loosen the transportation screw by
turning it clockwise with a coin and remove the stylus guard.
Press the PHONO/TAPE/AUX button once or twice to select
1
PHONO.
Gently open the dust cover.
2
< When opening the cover, pay attention to prevent your hand
from getting caught.
Put the record on the turntable.
3
When playing a 45 RPM large-hole single record, use the included
adaptor.
16
Listening to a Record
adaptor
Select the speed.
4
Gently push the clamper to the right to release the tone
5
arm.
Raise the cue lever to lift the tone arm off the tone arm
6
support.
< You can also start playing the record by raising the tone arm
without flipping up the cue lever, moving the arm over the
record and then slowly putting the tone arm down.
clamper
tone arm
transportation screw
cue lever