Cooler Temperature Settings - Sharp SJ-BA10IEXIE-EU Guide D'utilisation

Réfrigérateur-congélateur
Masquer les pouces Voir aussi pour SJ-BA10IEXIE-EU:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 36
CHAPTER -3: USING YOUR FRIDGE FREEZER
Child lock function
When would it be used?
To prevent children from playing with the buttons and changing the settings you have made, child
lock is available in this appliance.
Activating Child Lock
Press the Freezer and Cooler buttons simultaneously for 5 seconds.
Deactivating Child Lock
Press the Freezer and Cooler buttons simultaneously for 5 seconds.
Note: Child lock will also be deactivated if the electricity is interrupted or the fridge is unplugged.
Screen saver mode
Instructions for use
• This mode will be activated when you press the mode button for 5 seconds.
• If no button is pressed within 5 seconds when the mode is active, the lights of the control panel
will go off.
• If you press any button when the control panel lights are off, the current settings will appear on
the screen, and then you can make the adjustment as needed. If you do not cancel the screen
saver mode or do not press any button within 5 seconds, the control panel will go off again.
• To cancel screen saver mode press the on mode button for 5 seconds again.
• When screen saver mode is active you can also activate the child lock.
• If no button is pressed within 5 seconds after child lock is activated, the lights of the control panel
will switch off. You can see latest settings or modes status after you press any button. You can
cancel child lock as described in the instruction of this mode while the control panel light is on .
Door open alarm function
If cooler or freezer door is opened more than 2 minutes , appliance sounds 'beep beep'.

Cooler temperature settings

• Initial temperature value for the Cooler Setting Indicator is +4 °C.
• Press the cooler button once.
• When you first push this button, the last value will appear on the cooler setting indicator.
• Whenever you press this button, a lower temperature will be set. (+8°C, +6°C, +5°C, +4°C, +2°C,
Super cool)
• When you push the cooler set button until the Super cool symbol appears, and if you do not push
any button within 1 second, Super Cool will flash.
• If you continue to press the button, it will restart from +8°C.
• The temperature value selected before Holiday Mode, Super Freeze Mode, Super Cool Mode or
Economy Mode is activated and will remain the same when the mode is over or cancelled. The
appliance continues to operate with this temperature value.
EN -10-

Publicité

Table des Matières
loading

Table des Matières