Appendix (English); Technical Specifications - Alto Professional Radius 200 Guide D'utilisation

Appendix (English)

Technical Specifications

Hand-held condenser vocal microphone transmitter included with Radius 200.
Headset microphone and wireless belt-pack transmitter included with Radius 200H.
Lavalier/lapel microphone and wireless belt-pack transmitter included with Radius 200L.
1/4" (6.35mm) instrument adapter cable and wireless belt-pack transmitter included with Radius 200M.
Specifications are subject to change without notice.
Receiver
UHF Band Operation
Oscillator
Frequency Stability
Modulation
Transmission Range
Signal-to-Noise Ratio
Image & Spurious Rejection
Receiving Sensitivity
Selectivity
AF Response
THD
IF Frequency
Dynamic Range
Tone Signal
Audio Output
Display
Power
Case
Dimensions
(width x depth x height)
Weight
520–937.5 MHz (region-specific)
PLL Synthesized
±0.005%
FM
328 feet / 100 meters
> 100 dB (at 20 KHz deviation and 60 dBμV antenna input
80 dB minimum
At 2 uV over 52 dB/A SNR
> 50 dB
80 Hz – 18 KHz
< 1% (at 1 KHz)
1st: 243.95 MHz / 2nd: 10.7 MHz
> 100 dB
32.768 KHz
1 balanced XLR
1 unbalanced 1/4" (6.35mm)
High-visibility back-lit LCD with RF and AF meters
Supply: 12 V, 1 A, center positive (adapter included)
Consumption: 520 mA ±10 mA
Half 19" EIA-rack metal case
7.9" x 7.2" x 1.7"
20.0 cm x 18.3 cm x 4.2 cm
2.1 lbs.
1.0 kg
57