Alto Professional Radius 200 Série Guide D'utilisation page 8

Operation
To set up and use your Radius 200, follow the steps in this chapter in order. If you are setting
up a system using multiple receiver-transmitter pairs, set up each pair one at a time, and keep
each pair powered on as you set up others.
1. Set Up the Receiver
Optional: Connect Rackmount Pieces and/or Antennas
To use two receivers in a standard 19"
rack, use the included rackmount
brackets, coupling brackets, and
screws.
To use one receiver in a standard 19"
rack, use two long rackmount brackets
(sold separately) and screws.
We highly recommend using the
included antennas to improve and
strengthen reception.
You can also use an antenna booster
(sold separately) to further enhance the
signal.
8
Receiver
Rackmount
bracket
Coupling
bracket
Long
rackmount
bracket
Antenna
Antenna
booster
Coupling
bracket
Receiver
Rackmount
bracket
Receiver
Long
rackmount
bracket
Antenna
Receiver
Antenna
booster