La Sommeliere LS48.2Z Notice D'utilisation page 34

Tropical
Reversing the door
Please be noted that the door is not reversible.
5. OPERATING INSTRUCTIONS
It is recommended that you installed your appliance in a place where the ambient temperature is
between 23-26°C. If the ambient temperature is above or below recommended temperatures, the
performance of the unit may be affected and it may not be possible to obtain temperature between 5-
12°C for the upper zone and between 12 – 20°C for the lower zone.
How to set temperature
To turn on your wine cellar, you have to plug it and to turn off the appliance, you need to unplug it.
Your wine cellar is equipped with a control panel lock feature. The lock will automatically activate 20
seconds after the last button is pressed.
- - Press the button
indicating that the control panel is locked.
- - Press the button
indicating that the control panel is unlocked.
- You can adjust the temperature of your cellar using the
temperature of the upper zone, press the key
5 and 12°C. To adjust the temperature of the lower zone, press the key
the temperature between 12 and 20 °C. Press the button once, the temperature will increase or
decrease by 1 °C.
- Set the temperature, inside the wine cellar by pressing the
buttons to adjust the temperature in 1 increments.
- You can select the temperature to display in Fahrenheit or Celsius by long pressing the
for 2 seconds.
- Turn the interior light on or off by short pressing the light bulb symbol button
IMPORTANT: to optimize the functioning, it is important to respect a setting difference about 5°C
between upper and lower compartment (for example 9°C in the upper zone and 14°C in the lower
zone).
The set temperature of the top compartment must be always coldest than the top compartment. So the
lower compartment is always the hottest zone.
T
for 5 seconds to lock the access to the settings. You will hear a "BEEP"
for 5 seconds to unlock access to the settings. You will hear a "BEEP"
33
From +16 to +43
and
you can then choose the temperature between
(increase) and
keys. To adjust the
then you can choose
(decrease)
button
.