Carbon Filter; Installing The Handle - Zephyr brisas BWB24C32AG Guide D'utilisation, D'entretien Et D'installation

Carbon Filter

A built-in carbon filter protects your beverages by acting
as a natural barrier against harmful odors. The carbon
filter should be replaced every 3-6 months depending on
the unit's exposure level to odor. If the unit is placed in a
kitchen, regular replacement every three months is ideal.
Remove the carbon filter by turning counterclockwise to
unlock from rear panel.
Carbon Filter Replacement Part #: Z0F-C004

Installing the Handle

If pro handles are desired, refer below for the part number.
1. Push aside the door gasket on the side you wish to install the handle. Under the gasket you will see
two designated holes for handle installation and pre-installed screws.
2. Install the handle tightly as shown with two screws, lock washers and flat washers pre-installed.
Gasket
Flat Washer
Locked Washer
Screw
BWB24C32AG Use, Care, and Installation Guide
Installation Instructions
Part #: PRHAN-C002
Handle
Door Frame
Zephyr Presrv Pro Handle
Color: Stainless Steel
17