Reversing The Door Swing Of Your Appliance - Zephyr PRESRV PRB15C01BG Guide D'utilisation, D'entretien Et D'installation

Installation Instructions

Reversing the Door Swing of Your Appliance

Should you desire to reverse the opening direction of the door, please follow the instructions below.
Safely reversing the door swing of your appliance should require at least two people.
1
1
1 2
1 3
1 4
8 7
1 5
18
1. Take out the 2 screws from the lower door axis
1
2
2. Take out the 3 hinge screws from the top right
3
4
5
3. Unscrew 2 screws and remove the door magnet
6
4. Remove the 3 black decorative nails (7)
5. Install the lower door axis (9) and install the
9
(1), remove the door (2), and the axis plate (1)
from the door.
hinge (3) and remove it.
(4) and unscrew 2 screws and remove the
door stopper (5). Then, remove the new door
stopper (6) from the hardware package. Install
the door magnet (4) and door stopper (6) on
the opposite side of the door frame. Rotate the
door 180 degrees.
from the top left of the cabinet. Install the
black decorative nails to the top right of the
cabinet and install the new top hinge (8)
from the hardware package that includes
the installation manual at the top left of the
cabinet with 3 screws.
door once correctly aligned.
PRB15C01BG Use, Care, and Installation Guide
P R E S R V ™
B E V E R A G E
C O O L E R
S I N G L E ZO N E