NORSK KLEBER Marcello 140 Manuel D'utilisation page 17

Step 15
1. Put in place the smoke hood stone.
2. Assemble the side stones and the front
stone.
3. Put in place the corner stones.
4. Place the 15 mm 2-part steel ring assembly.
5. Insert (6) metal sealing strips into the slots
between stones.
6. Apply fire sealant (see steps 7 & 8)
7. Insert (4) 8 mm steel dowels into the side
stones as shown below.
8. Place the smoke direction plate so that it
rests on the steel dowels, and position it
against the rear wall.
Smoke hood stone
8 mm steel
dowels
Step 16
1. Place the labyrinth blocks as
shown below.
Labryrinth blocks
Step 17
1. Place the (rear) part of the top plate as
shown.
2. Place the (front) part of the top plate as
shown.
3. Insert the flu adapter. Use the sealing rope
etween the flue adapter and the rear top
plate.
Top plate (front)
Flue adapter
Top plate (rear)