Wall Installation - Wagan Tech 8586 Guide D'utilisation

Wall installation

First, remove the U-bolts. Make 2 holes in the wall and take out the expansion
bolt and washer. Attach the light onto the wall.
M6 spring washer
M6 nut
Please install the solar panel in a place without any shade and facing direct
sunlight for better charging.
After installation, the light angle can be adjusted.
As shown in the diagram below.
1
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User's Manual—Read before using this equipment
M6 flat washer
10˚
©2019 Wagan Corporation. All Rights Reserved.
Expansion bolts
2
20˚
4