SPECIAL SAFEGUARDS
• Unroll the power cord completely.
• Check that the tension in force in the country where you are corresponds to that indicated
on the apparatus.
• Connect the apparatus in a socket-outlet in good state, and connected to the ground, to
avoid any danger.
• Disconnect the power source cable before any operation of cleaning of maintenance and
accessories assembly.
• Stand the appliance on a table or flat surface.
• Do not use or keep this product outside when it is raining.
• Certain parts of the appliance can get hot. Do not touch them, as you may burn yourself.
• Never modify the appliance in anyway.
OPERATION INSTRUCTIONS
§ Before plugging in your new Raclette grill, check to see that the electric circuit is not
overloaded with other appliances. This unit should always be operated on a separate 220-
240 volt, AC outlet which is able to supply min.16A
§ Be certain that your unit is resting level on the countertop. Avoid using pans that are unstable
and easily tipped. Place pan under heating element.
§ Turn the switch on 1 position. The pilot light will glow indicating the heating element is
energized and heating will begin immediately
§ The metal surfaces will become hot. Do not touch while is use. When cooking is finished, turn
the thermostat back to « O » position.
§ The surface is hot when using or before cooled. Never touch the appliance before it's cooled
to avoid scald.
§ If the hotplate is not to be in use for a long period of time, it is recommended to unplug unit
from the outlet. This helps to prevent accidental burns.
USING YOUR RACLETTE
• Plug in the appliance.
• Put the switch at the position "MIN", the indicator comes on. Pre-heating time is 5 – 8 min
for the grill,
• Because the surface is very hot, it is recommended to put the appliance on anti-flame and
heat-proof cushion. It is also recommended that the minimal distance between wall or
environmentally components is not shorter than 15cm.
• It is possible that slight smoke smell comes out when first using.
• When first use, drop some oil on the surface of plate then wipe it with dry cloth.
• In order not to destroy the plating of Teflon, when turning or moving food, make sure a
wooden shovel is used.
• Don't put other mini pan which does not match the whole set on the appliance.