MAC Audio MPS 701 Mode D'emploi page 21

Now the minutes indication is flashing, set the minutes with the buttons
confirm with TIMER button.
The source playback is now flashing in the display, now set the source playback with the
buttons and
The alarm volume is now flashing in the display, now set the alarm volume with the buttons
and and confirm by pressing TIMER button.
The alarm is now set and activated, in the display TIMER is indicated.
Switch off alarm: Press the button TIMER in standby mode, TIMER will disappear.
Automatic shutdown (sleep)
When the appliance is in active mode, you can switch off the appliance automatically after a
preset time {between 90 and 10 minutes).
When the sleep timer is set, the SLEEP indicator is shown in the display. Press SLEEP button
repeatedly to set the desired shut down time in 10 minute sequence from 90 to 10 minutes.
Cancelling the sleep function: Press SLEEP button repeatedly until OFF appears on the
display.
The settings are saved automatically after 5 seconds of inactivity.
5 SOURCE: Switches input source: CD, USB, DAB, FM, LINE IN, BT
6 DIMMER/LED: Switches the illumination:
Short press: dims the brightness of the display OFF - 1 - 2 - OFF
Press and hold: Switches the illumination of the speakers and the side illumination of the
main unit OFF - various colors - red - blue - purple - OFF
7 PROG: To select a memory preset or to store a station.
FM operation:
A total of 30 FM stations can be stored in the memory.
• Select the desired station (FM). Open the memory using the PROGRAM button on the
remote control (7) by 3 seconds operation.
• Choose the desired station number by TUN+/- .
• The station number flashes in the display.
• Press the PLAY/PAUSE button again to store the station.
• The station number stops flashing.
• Repeat this procedure to store other stations
CD operation:
Programming the playback sequence when not running playback from a CD:
• Press the PROG button.
• Press SKIP FORWARD or SKIP BACK to select the desired track.
• Press PROG to confirm your selection.
• Select the next track. Up to 20 tracks can be stored in the playlist.
• Press PLAY to start playback of the programmed list.
USB operation:
Programming the playback sequence when not running USB playback.
• Press the PROG button.
• Press SKIP FORWARD or SKIP BACK to select the desired track.
Tracks from other folders can be added to the playlist by pressing FOLDER+ or FOLDER-.
• Press PROG to confirm your selection.
• Select the next track. Up to 99 tracks can be stored in the playlist.
• Press PLAY to start playback of the programmed list.
and confirm by pressing TIMER button.
21
and and