•
Never immerse electrical appliances, cords or plugs in water or any
other liquid.
•
Do not touch electrical appliances if they have fallen in the water.
Immediately pull the plug out of the socket. Stop using the appliance.
•
Make sure that electrical appliances, cords and plugs do not come
into contact with heat sources, such as a hot hob or open fire.
•
Never let cords hang over the edge of the sink, a worktop or a table.
•
Always remove plug from the socket when you are not using the
electrical appliance.
•
Remove the plug from the socket by pulling the plug itself and not
the cord.
•
Regularly check if the cord of the electrical appliance is not
damaged. Do not use the electrical appliance if the cord shows
signs of damage. If the cord is damaged, it should be replaced by
the manufacturer, a technical service provider or a person with an
equivalent qualification, to avoid any danger.
•
The appliance may not be switched on with the aid of an external
time switch, or by a separate system with remote control.
WHAT YOU SHOULD KNOW ABOUT THIS APPLIANCE
•
Be careful when using the appliance outdoors.
•
Never use the appliance in damp or wet locations.
•
Thoroughly clean the appliance after use (see Cleaning and
Maintenance).
•
Use solely the base supplied with the jug kettle. Never use the
base for other purposes.
•
Remove the jug from the base, and fill with water from the tap.
Never fill the jug above the 'max' level (0.8 litre).
•
Do not switch on the appliance before you have filled it with water.
Fill only with cold water.
•
The jug's lid must remain securely closed whilst the appliance is in
use.
•
Never open the lid when the water is still boiling.
•
Use the appliance only to boil or heat water. Never use it for other
liquids!
•
Fill the jug kettle with at least 0.5 litre of water.
•
Allow the appliance to cool to room temperature before storage.
22
EN