Panel Lock - LD Systems LDU500CS4 Série Manuel D'utilisation

Menu item to configure a receiver as a master or slave unit if two to five devices are daisy-chained. When daisy-chaining the receivers,
the microphone numbers are assigned automatically (Master = MIC 1 - 4, Slave 1 = MIC 5 - 8, Slave 2 = MIC 9 - 12, etc.). MAIN VOLUME,
PRIORITY, MODE, THRESHOLD and HOLD TIME are now centrally set on the master unit. Pressing the pressure rotary encoder PUSH TO
ENTER will take you to the selection menu for system settings. Now select the SETUP menu item by rotating the encoder (light background)
and press the encoder 2x to set up the receiver as Master or Slave unit as desired by rotating the encoder. Confirm the entry by pressing
the encoder. If you press the encoder only 1x, you can exit this menu item without changes by rotating the encoder and selecting the arrow
symbol (light background) and confirm by pressing the encoder. To return to the main display, select EXIT now by rotating the encoder (light
background) and confirm by pressing the encoder. After approximately 10 seconds of inactivity, the display will automatically return to the
main screen.
BRIGHTNESS
Menu item to adjust the display brightness. Pressing the pressure rotary encoder PUSH TO ENTER will take you to the selection menu for
system settings. Now select the BRIGHTNESS menu item by rotating the encoder (light background) and press the encoder 2x to adjust the
brightness level as desired from 01 to 10 by rotating the encoder. Confirm the entry by pressing the encoder. If you press the encoder only
1x, you can exit this menu item without changes by rotating the encoder and selecting the arrow symbol (light background) and confirm by
pressing the encoder. To return to the main display, select EXIT now by rotating the encoder (light background) and confirm by pressing the
encoder. After approximately 10 seconds of inactivity, the display will automatically return to the main screen.

PANEL LOCK

To protect the system settings against accidental manipulation, the editing functionality of the menu items can be blocked. Pressing the
pressure rotary encoder PUSH TO ENTER will take you to the selection menu for system settings. Now select the PANEL LOCK menu item
by rotating the encoder (light background) and press the encoder 2x to lock (PANEL LOCK ON) or reopen (PANEL LOCK OFF) the editing
function by rotating the encoder. Confirm the entry by pressing the encoder. If you press the encoder only 1x, you can exit this menu item
without changes by rotating the encoder and selecting the arrow symbol (light background) and confirm by pressing the encoder. To return
to the main display, select EXIT now by rotating the encoder (light background) and confirm by pressing the encoder. After approximately 10
seconds of inactivity, the display will automatically return to the main screen. If the editing function is locked, "DISPLAY IS LOCKED" appears
briefly in the display when attempting to make changes in the menu, To enable the editing function, retrieve the PANEL LOCK menu item and
proceed as described above.
EXIT
To return to the main display, select EXIT by rotating the encoder (light background) and confirm by pressing the encoder. After approximately
10 seconds of inactivity, the display will automatically return to the main screen.
MICROPHONE STATION STATUS DISPLAY
11