Operation - Ryobi RY401010 Manuel D'utilisation

WARNING:
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
WARNING:
Always inspect mower for missing or damaged parts
and blade for damage, uneven, or excessive wear prior
to use. Use of the mower with damaged or missing parts
can result in serious personal injury.
NOTICE:
Before each use, inspect the entire product for damaged,
missing, or loose parts such as screws, nuts, bolts, caps,
etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts
are replaced. Please contact customer service or an
authorized service center for assistance.
APPLICATIONS
You may use this product for the purpose listed below:
 Mowing your lawn
WARNING:
Always remove battery pack and remove the start key
from the tool when you are assembling parts, making
adjustments, cleaning, or when not in use. This will
prevent accidental starting that could cause serious
personal injury.

OPERATION

INSTALLING/REMOVING BATTERY PACK
See Figure 6.
 Raise the battery cover.
 Align raised ribs on battery pack with grooves in the
battery port and install the battery pack into the mower.
WARNING:
Make sure the latch on the bottom of the battery pack
snaps in place and the battery pack is fully seated and
secure in the mower's battery port before beginning
operation. Failure to securely seat the battery pack could
cause the battery pack to fall out, resulting in serious
personal injury.
 Lower the battery cover and make sure it is securely
closed.
To remove battery pack:
 Raise the battery cover.
 Press and hold the battery latch button at the bottom of
the battery pack.
 Remove battery pack from the mower.
 Lower the battery cover and make sure it is securely
closed.
For complete charging instructions, refer to the Operator's
Manuals for your battery pack and charger models.
STARTING/STOPPING THE MOWER
See Figures 7 - 8.
 Raise the battery cover.
 Install battery pack.
 Insert the start key into the slot beside the battery storage
port.
 Lower the battery cover.
 Press and hold the start button. Pull the blade control
lever toward the handle and release the button to start
the mower.
 To stop the mower, release the blade control lever.
WARNING:
To avoid accidental starting that could result in serious
personal injury, always remove the start key when moving
or transporting the mower.
8 — English