IV.
INSTRUCTIONS
Preferably, place the diffuser in the room half an hour before switching it on so that it can
adjust to the ambient temperature.
CAUTION: Do not tilt the unit when it is working. Do not fill in or
empty the tank when the diffuser is working. Do not put more than
3 drops of essential oils.
WARNING: DESPITE THE SAFETY CUT-OUT DEVICE THAT TURNS THE TRANSDUCER OFF,
AVOID LEAVING THE POWER SWITCHED ON TO THE DEVICE WHEN YOU ARE NOT USING IT.
TO STOP THE DIFFUSER COMPLETELY, UNPLUG THE UNIT FROM THE POWER SUPPLY.
Step 1: Remove the cover.
Step 2: Make sure the reservoir is
clean and fill the reservoir with a
maximum of 100 ml of clean
water. (Please put demineralized
water and essential oils without
alcohol).
Step 3: Pour a few drops of
essential
oil
into
reservoir. NOT MORE THAN 3
DROPS.
Step 4: Put the stopper cover
then the cover.
Step 5: With dry hands, plug the
adapter and press the button to
start the diffusion and light.
EN
the base
10