Assembling The Decorative Fire Place; Lighting The Decorative Fire Place - Qlima FFW 3052 Manuel D'utilisation

ASSEMBLING THE DECORATIVE FIRE PLACE

The manufacturer is not responsible for any harm or damage if attention is not
paid to the points described above.
The use of this product and the elements required for that purpose is entirely at
the end user's own risk.
PRODUCT LOCATION AND CLEARANCE (Fig. 1)
Assembly and required tools FFW 3052: Fig 2
Assembly and required tools FFW 3067: Fig 3
Always make sure to place the product on a non combustible underground which
is secure, firm, level and stable.

LIGHTING THE DECORATIVE FIRE PLACE

During and after operation the product will become very hot. It is likely that
because of this the product will change colour and/or will show oxidation marks.
This is normal and is not covered by the warranty.
Keep sufficient distance from the hot parts, since any contact can lead to severe
burns.
DANGER: FIRE HAZARD!
•
•
•
•
•
CAUTION! Do not use spirit or petrol for lighting or re-lighting! Use only fireligh-
ters complying to EN1860-3!
Suitable fuel:
•
•
To light the fire, use only:
A.
B.
C.
4
24
The decorative fire place will get very hot during operation and can start
other fires.
It is essential that you have a fire extinguisher and first-aid kit ready and be
prepared for an accident or fire.
Ignite only at a sheltered location.
Only tip out the fuel once the charcoal has completely burned out and cooled
down.
Switch off the appliance and extinguish the fire when it is unattended.
Dry wood only
Size of wood may not exceed the internal dimension of the decorative fire
place
Dry lighters or special fluid lighters.
News papers covered with small pieces of dry wood
Small dry wood such as shavings, twigs, branches