Télécharger Imprimer la page

iStorage diskashur PRO 2 Guide De Démarrage Rapide page 5

Masquer les pouces Voir aussi pour diskashur PRO 2:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Adding a New User PIN in addition to the Admin PIN
In addition to the Admin PIN, the diskAshur PRO
To create a new User PIN follow the steps below.
1. In Standby State (solid
press and hold down both the 'UNLOCK
and number '1' buttons.
2. Enter your Admin PIN (default
'11223344') and press the
'UNLOCK' button.
3. In Admin mode (solid
BLUE
and hold down 'UNLOCK + 3' buttons.
4. Enter your NEW User PIN and press
'UNLOCK' button.
5. Re-enter your NEW User PIN and press
'UNLOCK' button.
6. To exit Admin Mode press the 'LOCK'
button.
Unlocking with either the Admin or User PIN
Unlock with Admin PIN ( PIN +
1. To unlock the diskAshur PRO
GREEN
and
BLUE
LEDs will alternately blink several times and finally changing to a solid
indicating the drive is unlocked and ready to use as Admin.
Unlock with User PIN (
2. To unlock the diskAshur PRO
then enter your User PIN and press the 'UNLOCK' button again.
blink several times and finally changing to a solid
ready to use as the User.
For more features and detailed instructions please refer to the user manual pre-loaded on your new diskAshur PRO
and also available on our website.
2
RED
LED),
LED), press
)
as Admin, enter your Admin PIN and then press the 'UNLOCK' button.
2
+ PIN +
)
as the User, press the 'UNLOCK' button, all LEDs will blink on and off,
2
can be configured with an independent User PIN.
Solid
RED
LED will change to blinking
BLUE
LEDs.
GREEN
and
BLUE
LEDs blink rapidly together for
a few seconds then to a solid
solid
BLUE
LED indictaing the diskAshur PRO
'Admin Mode'.
Solid
BLUE
LED will change to blinking
solid
BLUE
LEDs.
Blinking
GREEN
and solid
a single
GREEN
LED blink and then back to blinking
GREEN
and solid
BLUE
GREEN
LED rapidly blinks for a few seconds then
changes to a solid
BLUE
has been successfully created.
Solid
RED
LED indicates the drive is locked and in
the standby state.
GREEN
and
GREEN
LED indicating the drive is unlocked and
GREEN
and
GREEN
and finally a
is in
2
GREEN
and
BLUE
LEDs will switch to
LEDs.
LED indicating the User PIN
GREEN
LED
BLUE
LEDs will alternately
2
5

Publicité

loading