GARDENIQUE Farmhouse Instructions D'utilisation page 5

STEP 3 - BACKFILL
Backfill around basin, keeping basin lid free
from debris.
STEP 4 - PLACE THE FOUNTAIN TOPPER
Run tubing of fountain topper through hole
of one side access panel. Position fountain
topper in place.
STEP 5 - ATTACH THE PUMP
Remove other side access panel and run
tubing through hole on lid of access panel
and connect to pump.
Run power cord through access panel hole,
reattach access panel.
STEP 6 - HANG THE BUCKET
Hang bucket in notch of the fountain unit.
Position weighted end of the bucket away
from the fountain topper.
STEP 7 - FILL THE BASIN AND TEST
Fill the basin with water then install the
lid. To ensure the pump flow control is set
appropriately and the water is flowing back
into the basin, place the fountain unit in its
final location adjusting as needed using the
pad sheets, and plug in the pump. Check for
leaks and adjust accordingly, then backfill
the hole with dirt.
STEP 8 - ADD ROCKS AND PLANTS
(NOT INCLUDED)
Wash decorative gravel to remove small
debris.
Decorate top of the basin with decorative
gravel, plug in the pump, and enjoy!
3
VISIT WWW.GARDENIQUEDECOR.COM FOR PRODUCT INFORMATION AND TIPS.