Perel PHT700 Mode D'emploi page 10

5. Overview
Refer to the illustrations on page 2 of this manual.
1
6. Operation
1. Install the appliance on a firm and level surface, free from obstructions and at least
1 m away from any wall or combustible materials.
2. Make sure the heater knob is in the off position (0). Insert the power plug into the
mains.
3. Turn the heater knob to either low or high mode, with or without oscillation (OSC).
4. After use, turn the selector knob back to the off position (0) and disconnect the
appliance from the mains.
This heater is equipped with a safety tilt switch, which automatically switches off the
appliance if it is not in the upright position.
V. 01 – 21/01/2020
PHT700/PHT1200
heater knob rotation knob
2
350 W (PHT700)
600 W (PHT1200)
700 W (PHT700)
1200 W (PHT1200)
LOW + OSC
HIGH + OSC
This appliance allows selecting the
oscillation degree. Do so by turning the
rotation knob.
10 ©Velleman nv