Features - RIDGID R7135 Manuel D'utilisation

FEATURES

PRODUCT SPECIFICATIONS
Chuck ....................................................................... 5/8 in.
Input .......................... 120 Volts, AC only, 60 Hz, 11 Amps
KNOW YOUR MUD MIXER
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating functions.
CHUCK KEY
A chuck key has been provided for use when installing or
removing paddles and removing the chuck. When not in
use, the chuck key can be placed in the chuck key holder.
HANDLE
This mixer has an ergonomic handle design for ease of
operation and to prevent loss of control.
CALIFORNIA PROPOSITION 65
WARNING:
This product and some dust created by power sanding, sawing, grinding, drilling, and other construction activities
may contain chemicals, including lead, known to the State of California to cause cancer, birth defects, or other
reproductive harm. Wash hands after handling.
Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products and,
• arsenic and chromium from chemically treated lumber.
Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce
your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are
specially designed to filter out microscopic particles.
No Load Speed ................................................0-800 RPM
LOCK-ON BUTTON
This tool is equipped with a lock-on feature for continuous
mixing.
MIXING PADDLE
The mixing paddle is designed to mix thick and heavy
materials.
NOTE: This mud mixer is designed for use with the included
RIDGID mixing paddle only (part no. 039850001057). Do not
use any paddles not recommended by the manufacturer of
this product.
VARIABLE SPEED SELECTOR
The mixer speed can be adjusted with the variable speed
selector. This allows you to adjust the mixture rate to suit
your particular application.
6 - English