FIRST SET UP
CONNECT POWER
- Remove the plastic foil from the display.
- Place batteries (4x 1.5 V AA) in the compartment and/or plug in the USB-cable.
Important: Do not use zinc-carbon batteries, they do not have enough capacity
to operate the eye mechanism. Use new alkaline batteries only.
Note We advise you to insert batteries even though you will use the USB cable,
so that in the event of loss of power you will not lose the clock settings.
The menu will now automatically guide you through the necessary items
to get Davy up and running:
Note When setting the hours you will first pass by the 24hrs setting and then AM/PM.
SET TIME
- Set the hours with the UP/DOWN button and
confirm with OK.
- Set the minutes with the UP/DOWN button and
confirm with OK.
SET BEDTIME
- Set the hours with the UP/DOWN button and
confirm with OK.
- Set the minutes with the UP/DOWN button and
confirm with OK.
SET 'OK TO GET UP' TIME
- Set the hours with the UP/DOWN button and
confirm with OK.
- Set the minutes with the UP/DOWN button and
confirm with OK.
GOOD TO KNOW
OPEN DAVY'S EYES
PRESS
Switch off keylock, press the UP button for 3 seconds
3 SEC.
to open Davy's eyes.
READY FOR USE
Davy will now show a circle of stars, indicating that
Davy is ready for use.
Every night Davy will:
- close his eyes at the set bedtime with 15 minutes
nightlight.
- open his eyes at the OK-to-get-up time without
sound alarm.
Note These are the standard settings for nightlight and
sound alarm. They can be changed in the setting-menu,
see next page.
RESTART THE NIGHTLIGHT /
CLOSE DAVY'S EYES MANUALLY
PRESS
3 SEC.
Every night at set bedtime, Davy will automatically close
his eyes and switch ON nightlight according to menu
settings. In case nightlight has already switched off when
you bring your child to bed, you can manually restart
the timer of the nightlight.
Press the DOWN button for 3 seconds to restart timer/
close eyes. Display will flash 2 times.
EN
12:00