Yamabiko ECHO SRM-3020TES Manuel D'utilisation page 27

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Loading nylon line
1.
Wear Indicators
Maintenance and care
1.
Cut one piece of line to recommended length.
 2.4 mm dia. - 6 m
2.
Align arrows on top of knob with openings in eyelets.
3.
Insert one end of nylon line into an eyelet, and push line
equal distance through nylon line cutting head.
4.
Hold nylon line cutting head while turning knob clockwise to
wind line onto spool until about 13 cm of each line remains
exposed.
IMPORTANT
When the wear indicators located at the bottom of the nylon
line cutting head are worn smooth, replacement of the cover or
the entire nylon line cutting head is required.
25

Publicité

Table des Matières
loading

Produits Connexes pour Yamabiko ECHO SRM-3020TES

Table des Matières