Pioneer DEH-S5000BT Mode D'emploi page 8

Detaching the front panel
Detach the front panel to prevent theft. Remove any cables and devices attached to the
front panel and turn off the unit before detaching it.
Detach
Important
• Avoid subjecting the front panel to excessive shock.
• Keep the front panel out of direct sunlight and high temperatures.
• Always store the detached front panel in a protective case or bag.
Resetting the microprocessor
The microprocessor must be reset in the following situations:
– Before using this unit for the first time after installation
– If the unit fails to operate properly
– When strange or incorrect messages appear on the display
1
Remove the front panel (page 8).
2
Press the RESET button with a pointed instrument longer than 8 mm.
Preparing the remote control
Remove the insulation sheet before use.
Attach
RESET button
- 8 -