Getting Started; First-Time Use - cahors TVT 290 HD-T2 Manuel D'utilisation

Getting Started

First-time use

Once you have connected the STB to your antenna and to your television, you need to:
1. Turn on the television.
2. Plug the TVT260HD into mains power.
4. Select the video or AV input channel to which the STB is connected: this can be done by
pressing the TV/AV or VIDEO button on your TV remote control. (Refer to your TV user's manual
for instructions.)
The Technologies banner appears on your TV screen, followed by a message asking if you want
to automatically search for channels and stations.
5. To search for available channels and stations, press OK on the remote control. The Auto Search
window appears and the searching begins.
If you want to search for channels and stations yourself, see "" on page 23 or instructions and
ignore the rest of this procedure.
As channels and stations are found, they are displayed on the Auto Search window.
When the STB can find no more channels and stations, the search ends and one of the TV
stations found will appear on the screen.
11