Publicité
GB
Thank you for the confidence you have shown in us by
choosing a REHOBOT product. REHOBOT stands for high
quality products and we hope that this product will serve
you well for many years.
To avoid problems in operation we recommend that you
read these instructions before you use the product.
Technical description (Fig. 1)
Capacity:
57/33 kN (12814/7418 lbs) (F1/F2)
Max. working pressure:
70 MPa (700 bar, 10150 psi)
Stroke:
20 mm (0.79 in)
Displacement:
16 cm
Weight:
2.7 kg (6 lbs)
BE57-39 has a swivelling hydraulic hose coupling. The
swivel coupling can rotate through 360 o even when pres-
surised.
Connecting to hydraulic pump
Connection
The tool is intended for connection to a hydraulic pump
with a maximum working pressure of 70 MPa (700 bar,
10150 psi).
To facilitate connection, the tool is fitted with a quick cou-
pling (male coupling).
The tool can only be connected to a pump when both are
depressurised.
Disconnection
NOTE, the tool must be depressurised before it can be
disconnected.
Operation
The tool is operated by means of the connected hydraulic
pump.
Working with the tool
See Fig. 2 (1, 2, 3)
Safety
Make sure that the operator's instructions are always
available to anyone who uses the tool.
Anyone who uses the tool must be thoroughly familiar with
the instructions for use and with any relevant laws and
regulations concerning safety or the environment.
Be aware of the risk of tripping over the hydraulic hoses
that connect the tool and pump.
Avoid sharp bends or kinks in the hydraulic hoses. If
hydraulic pressure is applied to a sharply bent hose it can
REHOBOT Hydraulics AB
(1 cu. in)
3
Skjulstagatan 11 A, 632 29 Eskilstuna, SWEDEN P.O. Box 1107 631 80 Eskilstuna
T. +46 (0)16 - 16 82 00 F. +46 (0)16 - 13 93 16 info@rehobot.se www.rehobot.se
lead to a sudden rise in pressure that could damage the
equipment.
Sharp bends or kinks in the hose can also cause internal
damage to the hose and unnecessary wear.
Take care if there are any hydraulic oil leaks. Hydraulic oil
under pressure can penetrate the skin and cause serious
injury.
Avoid putting strain on hoses, especially with sharp
objects, and do not drive over the hoses, etc.
Never lift or carry hydraulic components by their hoses or
couplings.
Maintenance/Service
For safety reasons it is important that servicing and repair
work are carried out by someone who is familiar with
high-pressure hydraulic products. Always use original NIKE
parts to ensure compliance with the technical require-
ments of NIKE HYDRAULICS. Special tools are required to
carry out certain servicing/repair measures correctly.
Hydraulic oil that is drained (or leaks out) from the tool
and components and is replaced during servicing or
repairs must be collected and disposed of in accordance
with the relevant environmental laws and regulations.
Disposal
When the equipment has reached the end of its useful life
it must be drained of any hydraulic oil and then scrapped.
For instructions on how to dispose of hydraulic oil and
other materials, please contact your nearest local environ-
mental authority.
Publicité
