Palmer PEKAP KAPUTT-OCTAVER Manuel D'utilisation page 10

pANEL DESCRIpTION
1
hIGh
With this filter you can regulate the amount and tone of the higher
order harmonics. The filter also produces a fuzzy sounds as it is
turned up.
2
BLEND
This is a classic wet/dry pot. Adjust the mix between the effected
and the unprocessed signal.
3
LOw
(This filter is only active when the MOD (
When active, this filter influences the amount and tone of the lower
order Harmonics.
4
LED
When lit the pedal is switched on. Also serves as a battery level
indicator.
5
ON/OFF SwITCh
This determines whether the pedal is active or bypassed.
6
IN
Use a quality instrument cable with 1/4" jacks to plug your guitar
into this jack socket.
7
OUT
Use a quality instrument cable with 1/4" jacks to connect this out-
put to the input of your guitar amplifier, or the next stomp box in
the signal chain.
10
9
) button is not pressed.)