Publicité
Les langues disponibles
Les langues disponibles
EN
•
Insert Plug Into Mains Socket.
Make sure that the supply voltage corresponds with the data
indicated on the appliance nameplate.
•
Select the desired function from the control panel (2):
- "0/I" Switch (ON/OFF) (3)
- Press the button once to turn the appliance and the fire effect on.
- Press the button a second time to turn the appliance and the fire effect off.
- "Resistor I" button (5)
- Press the button once to set the minimum heat function (1000W).
- Press the button a second time to stop the function.
- "Resistor I" button (5) + "Resistor II" button (6)
- Press the buttons (5 + 6) to set the maximum heat function (2000W).
- Press the buttons a second time to stop the function.
- Thermostat knob (4)
- Rotate thermostat control (4) clockwise or counter-clockwise to achieve de-
sired room temperature.
- To completely turn the appliance off press the switch (3) on "0" (OFF).
Cut-Off safety
- The appliance is equipped with a safety switch which activates if the appliance itself
overheats (example: blocked ventilation slots, etc.).
- For safety reasons, the appliance DOESN'T automatically turn back on once it has
cooled down
- To restore the appliance, disconnect the plug from the socket for at least 15 minutes.
- Reconnect the plug from the power socket.
52
USE
HET 2020
Publicité
