Publicité
Les langues disponibles
Les langues disponibles
Ozone is an extremely aggressive gas which - if not used properly - can damage one's
health. For this reason, ozone should never be breathed in directly.
In addition, at high doses ozone can damage the skimmer.
The dosing of ozone must be set so that no free ozone can be discerned on the skimmer lid.
Deltec skimmers can be operated with 50 mg/h of ozone per pump. An ozone-resistant T-
piece (Glass) should be fitted in the air hose above the skimmer pump. The free end of the
T-piece is connected to the ozonizer by means of an ozone-resistant hose.
In addition, if necessary (depending on the skimmer) an air valve must be installed.
It must be throttled until air is independently sucked through the ozonizer. The Skimmer
can be operated with ozone up to max. 50 mg/h per pump. The air connection of the
ozoniser should be connected via a suitable silicon hose to the protein skimmer pump. The
air is automatically sucked in the ozoniser by the skimmer pump. Should the skimmer
performance deteriorate please check the ozoniser for blockage.
Safety information:
The maximum ozone quantity of 50mg/hour per pump must not be exceeded.
-
The air passage can be reduced as a result of dust deposits in the ozonizer. This can
-
result in an increase in the water level in the skimmer, which - in extreme cases - can
overflow. To avoid this, check the ozonizer regularly to make sure that there are no
deposits of dust. If necessary, clean it.
Never breathe in free ozone.
-
The ozonizer may not be directly connected to the air valve.
-
In order to avoid water damage, the ozonizer must be placed high enough to ensure
-
that no water can penetrate it when the skimmer pump is switched off.
Operation with ozone
Technical data
Technical Data
Footprint (l/w)mm
Height mm*
Aquarium size / litre
Water level mm
Power consumption Watt
Power AC/DC Volt
Air litre/h max.
Air litre/h optimal / Cont. stage
Body diameter mm
Cup diameter inner tube mm
Pump
Controller
Double Base Anti-Flood
Safety overflow
Drain Skimmer cup
Cleaning system manuel
Cleaning system automatically
*+15 mm to remove the cup
- 12 -
Skimmer
3000i
340x280
570*
2000-3000
180-260
23 - 43
DC / 24V
1900
1600 / 8
250
140
DCC 5
50 W
●
●
●
-
CS 3000
Publicité
