Appendix (English); Technical Specifications - Rane DA216S Guide D'utilisation

Appendix (English)

Technical Specifications

Parameter
Mic Input Impedance
Line Input Impedance
Mic Gain Control
Mic Pad
Line Gain Range
Overall Mic Gain
Overall Line Gain
Max Mic Input Level
Max Line Input Level
Overload LED
Phantom Power
Output Impedance
Output Drive Level
Output Cable Length
Mic Equivalent Input Noise
Line Signal-to-Noise Ratio
THD+Noise (Line Input)
Frequency Response, Line
Frequency Response, Mic
Frequency Response, Line
Crosstalk
Power Supply Requirement
Connectors
Dimensions
(width x depth x height)
Weight
Specifications are subject to change without notice.
Trademarks & Licenses
Rane is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries.
All other product names, company names, trademarks, or trade names are those of their respective owners.
Specification
1.82k
17.9k
+40 & +60
20
0 & +20
+56 & +76
+16 & +36
-20
+21
3 dB below clip
+15
200
+24
1500
-128
100
0.005
15–50 kHz
15–50 kHz
30–50 kHz
80
100 to 240
(2) Euroblock zone inputs (+, –, ground)
(16) Euroblock zone outputs (+, –, ground)
(1) IEC power inlet
19.0" x 5.3" x 1.75"
48.3 x 13.3 x 4.4 cm
4.0 lbs.
1.9 kg
Limit Units Conditions/Comments
Ω
1% Balanced 909 + 909
1% Ω Balanced 8.97k + 8.97k
+ 2 dB 2-position switch
+ 2 dB 2-position switch
+ 2 dB 2-position switch
+ 4 dB All controls maximum
+ 4 dB All controls maximum
typ dBu Gain at 40 dB
typ dBu Gain at 0 dB
typ Clip defined as 1% THD+N
+0.5 VDC Phantom Power switch active
1% Ω Balanced 100+100
typ dBu 600 Ω load
max feet Belden 8451 or equivalent
typ dBu Rs=150, gain=60 dB
min dBV Gain=0 dB, re +4 dBu, 22 kHz BW
typ % Gain=0 dB, +4 dBu@1 kHz, 80 kHz BW
+0, -3 dB 0 dB Gain, 0 dBu Output
+0, -3 dB 40 dB Gain, 0 dBu Output
+0, -3 dB 60 dB Gain, 0 dBu Output
typ dB +4 dBu Output, 1 kHz
10% VAC 50/60 Hz, 7W
27