04 – select language
05 – standby mode
06 – buzzer
07 – initial loading
08 – stove status
4.6.1 Menu 01 – adjust fans
The item of menu 01, if enabled, adjusts the speed of the supplementary fans (not available).
4.6.2 Menu 02 – set clock
Before operating with the stove it is necessary to set the current time and date so that there is a reference for
possible chrono programming.
The electronic control device has a lithium battery mod. CR2032 of 3 Volt inside. It allows the internal clock with
own autonomy; if the clock signal does not appear when the stove is off or when switching the stove again a series
of "0000" appears, it means it has to be substituted and you need to call one of our service point authorised for its
substitution.
4.6.3 Menu 03 – enable chrono
Allows all chronothermostat functions to be enabled/disabled.
Regarding the selection and entering of times, use the six buttons,
following the table in par. 4.2.
It allows to enable and disable all the thermostat functions programmed;
with the set ON you activate this function and it appears the led
[ D ] related to it.
When the daily, weekly, or week-end program is set you can see
on the upper right side of the display it appears the led [C].
04 – week-end
program
01 - Italian
02 - French
03 - English
04 - German
20 – start prog 3
21 – stop prog 3
22 – Monday prog 3
23 – Tuesday prog 3
24 – Wednesday prog
3
25 – Thursday prog 3
26 – Friday prog 3
27 – Saturday prog 3
28 – Sunday prog 3
29 – start prog 4
30 – stop prog 4
31 – Monday prog 4
32 – Tuesday prog 4
33 – Wednesday prog
4
34 – Thursday prog 4
35 – Friday prog 4
36 – Saturday prog 4
37 – Sunday prog 4
01 – week-end
chrono
02 – start 1
03 – stop 1
04 – start 2
05 – stop 2
49
time
time
on / off
on / off
on / off
on / off
on / off
on / off
on / off
time
time
on / off
on / off
on / off
on / off
on / off
on / off
on / off
on / off
set
set
set
set
on / off
on / off
set
-
D
C
TERMOVIOLA PLUS
B
A