Troubleshooting&Transport; Troubleshooting; Transport - Burg Basic CEH3 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6. TROUBLESHOOTING&TRANSPORT

6.1 troubleShootinG

If you still have a problem with your appliance after checking these basic troubleshooting
steps, please contact an authorised service person or qualified technician.
Problem
The hob or cooking zones
cannot be switched on.
Oven does not switch on.
No heat or oven does not warm
up.
Cooking is uneven within the
oven.
Oven light (if available) does not
operate.
The oven fan (if available) is
noisy.

6.2 tranSport

If you need to transport the product, use the original product packaging and carry it using
its original case. Follow the transport signs on the packaging. Tape all independent parts to
the product to prevent damaging the product during transport.
If you do not have the original packaging, prepare a carriage box so that the appliance,
especially the external surfaces of the product, is protected against external threats.
Possible Cause
There is no power supply.
Power is switched off.
Oven temperature control is
incorrectly set.
Oven door has been left
open.
Oven shelves are incorrectly
positioned.
Lamp has failed.
Electrical supply is
disconnected or switched
off.
Oven shelves are vibrating.
EN - 17
Solution
Check the household fuse for the appliance.
Check whether there is a power cut by trying
other electronic appliances.
Check whether there is power supplied.
Also check that other kitchen appliances are
working.
Check that the oven temperature control knob
is set correctly.
Check that the recommended temperatures
and shelf positions are being used.
Do not frequently open the door unless you are
cooking things that need to be turned. If you
open the door often, the interior temperature
will be lower and this may affect the results of
your cooking.
Replace lamp according to the instructions.
Make sure the electrical supply is switched on
at the wall socket outlet.
Check that the oven is level.
Check that the shelves and any bake ware are
not vibrating or in contact with the oven back
panel.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Basic ceh4

Table des Matières