Avintage AV45XDZI-1 Notice D'utilisation page 41

• Touch the UP and DOWN mark once of each compartment to set the desired temperature.
• The temperature will increase 1°C or 1ºF if you touch the UP mark once, or the temperature will decrease 1°C or 1ºF if
you touch the DOWN mark once.
•
To view the "set" temperature in either zone at any time, touch the UP or DOWN mark of each compartment, the "set"
temperature will temporarily "flash" in the LED display for 5 seconds. Then the display shows the current inner temperature
again.
MODEL 3 ZONES
Power
To turn this appliance on/off, press the bottom
the audible alarm when the alarm is on.
LIGHT
To control the inner light turn on/off.
« UP »
Used to increase (warm) the set temperature by 1°C/1°F.
« DOWN »
Used to decrease (cool) the set temperature by 1°C/1°F.
SELECTOR
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature from Fahrenheit to
Celsius or from Celsius to Fahrenheit, press the button
SETTING THE TEMPERATURE CONTROL
The wine cooler has three temperature zones. The temperature of all zones can be set separately.
The temperature settings of UPPER ZONE are adjustable with the range +11°C et +22°C (+52°F et +72°F), the preset
temperature at the factory is 18°C/65°F.
The temperature settings of MIDDLE ZONE are adjustable with the range 5º-11ºC/40º-52ºF. The preset temperature at the
factory is 8ºC / 46ºF.
The temperature settings of LOWER ZONE are adjustable with the range 11º-13ºC/52º-56ºF. The preset temperature at the
factory is 12ºC / 54ºF.
Temperature control for upper and middle ZONE at upper control unit. Temperature control for lower ZONE at lower control
unit.
• To view the "set" temperature in either zone at any time, touch the UP or DOWN mark, the "set" temperature will
temporarily "flash" in the LED display for 5 seconds.
Upper control unit
Lower control unit
and hold for 5 seconds. Pressing the
for 5 seconds
key once can switch off
41