Maintenance And Cleaning - Imetec S0701 Mode D'emploi

EN
Refer to the figure in the illustrative guide of the instructions for use.
Device with separate buttons for:
•
on/off (4 A)
•
air flow selection (4B)
•
air temperature selection (4C)
•
cool air flow (4D)
On/Off button (4A)
Press this button to switch the appliance on.
NOTE: this hair dryer has a memory function. After using
it the first time, the next time it will then automatically set
the last temperature selected.
Air flow selection button (4B)
◦
= medium air flow
◦◦
= strong air flow
Air temperature selection button (4C)
Press the air temperature selection button (4C) to select the required
air temperature.
The red LEDs indicate the setting being used.
1 LED = low temperature
2 LEDs = medium temperature
3 LEDs = high temperature
Cool air flow button (4D)
The blue LEDs indicate that the function is active.
This appliance uses ion technology to keep your hair hydrated while
it is being dried. This function is activated automatically when the
appliance is switched on.
o n .

MAINTENANCE AND CLEANING

Cleaning the appliance and accessories
Clean the appliance and the accessories (diffuser, nozzle) with a
damp cloth when needed. Do not use solvents or other aggressive
or abrasive detergents. Otherwise, the surface could be damaged.
Check the intake opening of the appliance regularly and remove all
WARNING! Risk of fire. DO NOT use
flammable products on hair or on the
appliance.
WARNING! Always disconnect the
appliance from the mains
cleaning or performing maintenance.
WARNING! Make sure all cleaned parts
are completely dry before reusing the
appliance.
14
before